7 Truck Accessories Worth Researching Before Your Next Haul
A truck cab is an office, a break room, and sometimes a bedroom, all moving at highway speed. The right accessories make that space safer and easier to work in. The wrong ones become clutter and drain your wallet.
This guide is a checklist for comparing seven categories of driver-focused equipment. It does not rank brands, and we have not tested the products in these categories. Each section explains what to look for. First, check your carrier’s policy on in-cab equipment and state rules where you run.
1. Dash camera
A dash camera records the road ahead; some models also record the cab or behind the trailer. Drivers research them because video can help show what happened in a collision that was not your fault.
What to look for:
- Video clarity in real conditions. Look for clear resolution and good low-light performance, not just a high number on the box. Plates and signs should be readable at night and in rain.
- Loop recording and storage. The camera should overwrite the oldest footage automatically. Check supported memory card size and whether one is included.
- A reliable mount. It should hold firm over rough roads and stay within windshield rules. Some models also flag hard braking or impacts and protect that clip from being overwritten.
Keep this checklist in hand when you compare dash cameras, and the marketing claims get easier to separate from the features that matter.
2. Truck-specific GPS navigation
A phone map is built for cars. A truck GPS lets you enter your height, weight, length, and load type, then routes you around restrictions a car never thinks about — low clearances, weight-limited bridges, and no-truck roads.
What to look for:
- Vehicle profile settings. Confirm you can save your truck’s dimensions and weight, and that it warns you before a restricted stretch, not after you are on it.
- Map updates and offline maps. Restrictions change, and rural coverage drops. Check how updates are delivered, whether they cost extra, and that maps work without a phone signal.
- A screen you can read at a glance. Bright, large text, mounted where it does not block your view.
When you compare truck GPS navigators, the vehicle profile and the update policy matter more than the longest feature list on the box.
3. Hands-free headset and a solid phone mount
This one is not just comfort — it is federal law. Under FMCSA rules (49 CFR 392.82), a commercial driver may not hold a mobile phone while driving, dial by pressing more than one button, or reach for a phone in a way that takes you out of your seated, belted position. Texting is banned separately under 49 CFR 392.80. “Driving” includes sitting in traffic with the engine running. Hands-free use is allowed when the phone is within close reach and a call takes a single button press or voice command.
What to look for:
- One-press controls. Many drivers prefer one ear open for traffic and yard sounds. Answering and ending a call should take a single press.
- Microphone noise reduction. Cab noise is constant. Look for headsets that filter road and engine noise so dispatch and family can hear you.
- Battery life in talk time. Match it to your longest day. USB-C charging in the cab beats a special dock at home.
- A mount that keeps the phone close. Steady, within easy reach, and not blocking mirrors, gauges, or your view.
Judge the pair together when you shop: Bluetooth headsets for truck drivers handle the call, and a solid truck phone mount keeps the phone close, steady, and legal.
4. Tire pressure monitoring and basic tire tools
Tires are a major running cost, and pressure problems are easier to catch early than on the shoulder. A tire pressure monitoring system (TPMS) watches pressure — and on some models, temperature — across your steer, drive, and trailer tires and warns you when one drops.
What to look for:
- Enough sensors for your setup. Count every position you want covered, including the trailer, and confirm the system supports that number.
- A display you can check quickly. Alerts should be obvious without a long look away from the road.
- Sensor style. External cap sensors move between trailers easily; internal ones are protected but harder to service.
- Pair it with manual tools. A quality tire pressure gauge and a tread depth gauge cost little and confirm what the monitor says during your pre-trip.
Compare tire pressure monitoring systems against your real setup — tractor, trailer, and the positions you want covered — before you spend.
5. Portable jump starter and backup power
A dead battery at a rest area can cost you hours. A portable jump starter sized for diesel engines, or a small power station, can also keep a phone and lights charged with the truck shut down.
What to look for:
- Ratings that match your engine. Check the manufacturer’s guidance for diesel engines and your battery setup, rather than guessing from the biggest number on the box.
- Cold-weather performance. Batteries weaken in the cold. Look for operating temperatures that fit your region.
- Useful extras. A built-in light, USB ports, and protection against reversed connections beat novelty features. And keep it charged — pick a cab spot and a habit, like topping it up during your weekly reset.
Size the unit to your engine and keep it charged, and a heavy-duty jump starter turns a dead battery from a lost day into a short delay.
6. 12-volt cooler or compact fridge
Eating every meal at a truck stop adds up, in money and in how you feel by week’s end. A 12-volt cooler or small fridge lets you carry water, fruit, sandwiches, and leftovers from home.
What to look for:
- True refrigeration versus cooling-only. Thermoelectric coolers chill below the surrounding air but may not hold refrigerator temperature on a hot day. Compressor models cost more and cool like a home fridge. Decide which you need for food safety.
- Size against your cab. Measure first. A cooler that blocks the passenger seat or bunk loses its value fast, and removable liners matter when something spills at mile 400.
- Power draw. Check wattage and whether it has a low-voltage cutoff, so it cannot drain your starting batteries overnight.
Measure your cab first, then compare 12-volt truck coolers against the space, power draw, and cooling type you actually need.
7. Roadside safety and visibility kit
Breakdowns happen in bad places: narrow shoulders, dark ramps, bad weather. A simple kit helps you be seen and work safely while you wait for help.
What to look for:
- Visibility basics. A reflective vest you can throw on in seconds, sized to fit over a jacket, plus a complete, sturdy set of reflective triangles that stores flat.
- A dependable work light. A rechargeable light with a magnet or hook frees both hands. Add work gloves, a basic tool roll, and spare fuses — buy for durability, not quantity.
Ready-made roadside safety kits bundle most of these basics together, or you can assemble the same kit piece by piece — either way, buy for durability, not quantity.
The bottom line
You do not need all seven categories at once. Start with a current problem: the rule you must follow (hands-free), the risk to cover (a dash camera), or the cost to control (tires and food). Compare a few options with the checklists above, check specifications and the return policy, and confirm the gear fits your truck and carrier’s rules.
SmartPath Media guides are educational starting points. We have not personally tested the products described here. Features, prices, and rules can change — verify details before purchasing. Some links may be affiliate links; see our disclosure.
Drive Smarter. Think Smarter. Live Smarter.
← Return to SmartPath Media